Brcsequent56softwaredownload
CLICK HERE ->->->-> https://blltly.com/2tzuIK
How to Download and Install BRC Sequent 56 Software
BRC Sequent 56 is a software application for installation and maintenance of the Sequent 56 LPG kit, which is a product of BRC Gas Equipment, a brand of M.T.M. S.r.l. and part of the Canadian Westport Fuel Systems Inc. group[^1^]. The Sequent 56 LPG kit is a system that allows vehicles to run on liquefied petroleum gas (LPG) as an alternative fuel source.
In this article, we will show you how to download and install the latest version of BRC Sequent 56 software, which is version 1.16[^2^]. This version does not require a security dongle anymore, which makes it easier to use[^3^]. You will also need a USB cable driver to connect your computer to the LPG kit[^2^].
Step 1: Download the software and driver files
You can download the BRC Sequent 56 software and the USB cable driver from the following links:
BRC Sequent 56 software version 1.16: https://hybridsupply.uk/downloads/file/sequent-56-version-1-16/ [^1^]
USB cable driver: http://www.380db.com/forums/thread-view.asptid=1377&start=1 [^2^]
The files are compressed in RAR format, so you will need a program like WinRAR or 7-Zip to extract them.
Step 2: Install the USB cable driver
Before you can connect your computer to the LPG kit, you need to install the USB cable driver. To do this, follow these steps:
Extract the USB cable driver file (impco utility.rar) to a folder on your computer.
Open the folder and run the setup.exe file.
Follow the instructions on the screen to complete the installation.
Restart your computer if prompted.
Step 3: Install the BRC Sequent 56 software
After installing the USB cable driver, you can install the BRC Sequent 56 software. To do this, follow these steps:
Extract the BRC Sequent 56 software file (Sequent 56_116.rar) to a folder on your computer.
Open the folder and run the setup.exe file.
Follow the instructions on the screen to complete the installation.
Restart your computer if prompted.
Step 4: Connect your computer to the LPG kit
Now that you have installed both the USB cable driver and the BRC Sequent 56 software, you can connect your computer to the LPG kit using a USB cable. To do this, follow these steps:
Turn off your vehicle's engine and ignition.
Plug one end of the USB cable into your computer's USB port.
Plug the other end of the USB cable into the LPG kit's diagnostic port, which is usually located under the dashboard or near the engine compartment.
Turn on your vehicle's ignition, but do not start the engine.
Step 5: Launch and use the BRC Sequent 56 software
You are now ready to launch and use the BRC Sequent 56 software to perform installation and maintenance tasks on your LPG kit. To do this, follow these steps:
Open the BRC Sequent 56 software on your computer by clicking on its icon or searching for it in your programs menu.
The software will automatically detect and communicate with your LPG kit via the USB cable.
You can now access various 061ffe29dd