ICOM RS-BA1 Remote Control Software.rar VERIFIED
ICOM RS-BA1 Remote Control Software.rar ===== https://tiurll.com/2tzZU0
How to Use the ICOM RS-BA1 Remote Control Software
The ICOM RS-BA1 is a software that allows you to remotely control your ICOM transceiver from another room or location using an IP network. You can operate the radio as if you were sitting in front of it, with access to various functions and settings. The software also supports voice recording, dualwatch operation, and spectrum scopes with waterfall functions for some models.
In this article, we will show you how to download, install, and use the ICOM RS-BA1 remote control software.
Downloading the Software
The ICOM RS-BA1 software is available for purchase from the ICOM website or authorized dealers. You can also download the latest version of the software from the ICOM support page[^1^]. The software comes in a zip file that contains the following files:
Update.exe: The installer for updating the software.
Recover_Setup_Rsba1_Control.reg: A registry file for initializing the settings of the remote control software.
Recover_Setup_Utility.reg: A registry file for initializing the settings of the remote utility software.
RS-BA1_Ver2_Instruction_Manual.pdf: The instruction manual for the software.
RS-BA1_Ver2_Quick_Guide.pdf: A quick guide for the software.
To download the software, follow these steps:
Go to the ICOM support page[^1^] and click on \"Download\".
Read and agree to the terms and conditions of the download service.
Save the zip file to your computer and extract it to a folder of your choice.
Installing the Software
To install the software, follow these steps:
Make sure you have an older version of RS-BA1 Version 2 installed on your computer. If you have RS-BA1 Version 1, you need to purchase and install RS-BA1 Version 2 first.
Run the Update.exe file extracted from the zip file and follow the instructions on the screen.
If prompted, restart your computer after the installation is complete.
The software will be updated to the following versions:
Remote control: Version 2.40
Remote utility: Version 2.20
Using the Software
To use the software, follow these steps:
Connect your ICOM transceiver to your computer or network according to your model. For example, you can use an Ethernet cable for models with a built-in network function, such as IC-7610 or IC-9700; a USB cable for models with a USB port, such as IC-7300 or IC-7100; or a Wi-Fi network for models with a Wi-Fi function, such as IC-705. Refer to your transceiver's manual for more details.
Run the Remote utility software on your computer and configure the settings according to your transceiver's model and connection method. Refer to the RS-BA1 instruction manual[^4^] or quick guide for more details.
Run the Remote control software on your computer and select your transceiver's model from the drop-down menu. Click on \"Connect\" to establish a connection with your transceiver.
You can now operate your transceiver remotely using the Remote control software. You can adjust various parameters using the slider controls or tuning knobs on the screen, or use keyboard shortcuts or mouse clicks. You can also access several separate windows for CW keyer settings, voice memory, SSB passband settings, filter settings, spectrum scope, and waterfall functions. Refer to the RS-BA1 instruction manual[^4^] or quick guide for more details.
If you have an optional RC-28 remote control USB encoder, you can also use it with the RS-BA1 software. The RC-28 has a tuning knob and two programmable function keys that can be used to control 061ffe29dd