Quartus Web 13 1 0 162 Windows Tar BEST

Quartus Web 13 1 0 162 Windows Tar BEST

CLICK HERE >>> https://urlgoal.com/2tzBwS

How to Download and Install Intel Quartus II Web Edition Design Software Version 13.1 for Windows

Intel Quartus II Web Edition Design Software Version 13.1 for Windows is a software package that allows you to design, simulate, and program FPGA devices from Intel. It is a full-featured EDA product that supports a wide range of FPGA device families and platforms. In this article, we will show you how to download and install this software on your Windows computer.

Step 1: Download the software .tar file and the appropriate device support files

The first step is to download the software .tar file and the device support files that match your FPGA device family. You can find these files on the Intel website[^1^]. The software .tar file is named Quartus-web-13.1.0.162-windows.tar and has a size of 4.4 GB. The device support files are named Quartus-web-13.1.0.162-device-family.qdz, where family is the name of your FPGA device family, such as cyclonev or arria10. You can download multiple device support files if you need to work with different FPGA device families.

Step 2: Extract the files into the same temporary directory

The next step is to extract the files into the same temporary directory on your computer. You can use any software that can handle .tar and .qdz files, such as 7-Zip or WinRAR. Make sure you have enough disk space to extract the files, as they will take up about 10 GB of space.

Step 3: Run the setup.bat file

The final step is to run the setup.bat file that is located in the temporary directory where you extracted the files. This will launch the installation wizard that will guide you through the installation process. You will need to accept the license agreement, choose the installation directory, select the device support files to install, and configure some settings for your software environment. The installation may take several minutes depending on your system configuration.

Conclusion

Congratulations! You have successfully downloaded and installed Intel Quartus II Web Edition Design Software Version 13.1 for Windows on your computer. You can now start designing, simulating, and programming FPGA devices from Intel using this software. For more information on how to use this software, you can refer to the documentation links provided on the Intel website[^1^]. You can also check out some of the additional resources available on the website, such as requesting a license file, finding support, or contacting distributors.How to Use Intel Quartus II Web Edition Design Software Version 13.1 for Windows

Intel Quartus II Web Edition Design Software Version 13.1 for Windows is a software package that allows you to design, simulate, and program FPGA devices from Intel. It is a full-featured EDA product that supports a wide range of FPGA device families and platforms. In this section, we will show you some of the basic features and functions of this software.

Creating a New Project

To create a new project, you need to launch the Intel Quartus II software from the Start menu or the desktop shortcut. You will see the main window of the software, where you can access various tools and options. To create a new project, you can either click on the New Project Wizard button on the toolbar, or select File > New Project Wizard from the menu bar. This will open the New Project Wizard dialog box, where you can specify the name and location of your project, the FPGA device family and device that you want to target, and the source files that you want to include in your project. You can also set some advanced options for your project, such as synthesis and simulation settings, timing constraints, and pin assignments. After you finish setting up your project, click Finish to create your project.

Designing Your Circuit

To design your circuit, you can use one of the following methods:

Graphical User Interface (GUI): You can use the GUI to create and edit schematic diagrams of your circuit. You can access the GUI by clicking on the Block Editor button on the toolbar, or selecting File > New > Block Diagram/Schematic File from the menu bar. You can then use the tools and components available on the toolbar and the library to draw your circuit. You can also use the GUI to create and edit state machines, flowcharts, and block diagrams.

Hardware Description Language (HDL): You can use HDL to write textual descriptions of your circuit using a programming language such as Verilog or VHDL. You can access the HDL editor by clicking on the HDL Editor button on the toolbar, or selecting File > New > Verilog HDL File or File > New > VHDL File from the menu bar. You can then use the syntax and keywords of the chosen language to write your code. You can also use HDL templates and wizards to generate code snippets for common functions and structures.

MegaWizard Plug-In Manager: You can use the MegaWizard Plug-In Manager to create and customize parameterized modules (PMs) that perform specific functions in your circuit. You can access the MegaWizard Plug-In Manager by clicking on the MegaWizard Plug-In Manager button on the toolbar, or selecting Tools > MegaWizard Plug-In Manager from the menu bar. You can then choose from a list of available PMs that are categorized by function, such as arithmetic, memory, logic, etc. You can also modify the parameters and options of each PM according to your needs.

Simulating Your Circuit

To simulate your circuit, you can use one of the following tools:

ModelSim*-Intel FPGA Edition: This is a third-party tool that is integrated with Intel Quartus II software and allows you to perform functional and timing simulation of your circuit using HDL testbenches. You can access ModelSim*-Intel FPGA Edition by clicking on the ModelSim*-Intel FPGA Edition button on the toolbar, or selecting Tools > Run Simulation Tool > RTL Simulation or Tools > Run Simulation Tool > Gate Level Simulation from the menu bar. You can then use the ModelSim*-Intel FPGA Edition GUI to load your design files, compile them, run them, and view the simulation results.

NativeLink: This is a feature that allows you to link Intel Quartus II software with third-party simulation tools such as Mentor Graphics ModelSim*, Cadence Incisive*, or Synopsys VCS*. You can access NativeLink by selecting Edit > Preferences > EDA Tool Options 061ffe29dd