Raid Pci Ven 105a Dev 3373 Subsys 80f51043 Rev 02
Click Here >>> https://tiurll.com/2tzBeQ
How to Install Promise FastTrak 378 Controller Driver for Windows 10
If you have a Promise FastTrak 378 Controller, also known as PDC20378 (FastTrak 378/SATA 378), you may have trouble finding the right driver for Windows 10. This device is a RAID controller that allows you to connect multiple hard drives and improve their performance and reliability. However, the official driver from Promise Technology, Inc. is only compatible with Windows XP, Vista, and 7. So how can you install the Promise FastTrak 378 Controller driver for Windows 10
In this article, we will show you a simple and effective method to install the Promise FastTrak 378 Controller driver for Windows 10 using a device identifier tool. This tool will help you find the correct driver for your device based on its hardware ID, which is a unique code that identifies your device. The hardware ID for the Promise FastTrak 378 Controller is PCI\\VEN_105A&DEV_3373&SUBSYS_80F51043&REV_02[^1^]. You can also find this code in your Device Manager under Other Devices.
Here are the steps to install the Promise FastTrak 378 Controller driver for Windows 10:
Download and install a device identifier tool such as Treexy Driver Fusion[^1^] or Device Hunt[^2^]. These tools will scan your system and detect your devices and their hardware IDs.
Launch the device identifier tool and look for the Promise FastTrak 378 Controller under Storage Controllers or Other Devices. You should see its hardware ID as PCI\\VEN_105A&DEV_3373&SUBSYS_80F51043&REV_02.
Copy the hardware ID and paste it into the search box of the device identifier tool. The tool will search its database and find the matching driver for your device.
Download the driver file from the device identifier tool. It should be a zip file containing an executable file and a readme file.
Extract the zip file to a folder on your computer. You may need to use a software such as WinRAR or 7-Zip to do this.
Open the readme file and follow the instructions to install the driver. You may need to run the executable file as an administrator or in compatibility mode for Windows XP or Vista.
Restart your computer and check if the Promise FastTrak 378 Controller is working properly in your Device Manager. You should see it under Storage Controllers with no yellow exclamation mark.
Congratulations! You have successfully installed the Promise FastTrak 378 Controller driver for Windows 10. You can now enjoy the benefits of RAID technology on your computer.
If you have any questions or problems with installing the driver, you can contact Promise Technology, Inc. through their website[^3^] or their support forum. They may be able to provide you with more assistance or updated drivers.
In this article, we have shown you how to install the Promise FastTrak 378 Controller driver for Windows 10 using a device identifier tool. This method is simple and effective, and it can help you solve the compatibility issue between your RAID controller and your operating system. However, if you want to learn more about the Promise FastTrak 378 Controller and its features, you can read on.
The Promise FastTrak 378 Controller is a PCI card that supports up to four Serial ATA (SATA) or Parallel ATA (PATA) hard drives. It supports RAID levels 0, 1, and 0+1, which offer different advantages in terms of speed, security, and capacity. RAID stands for Redundant Array of Independent Disks, and it is a technology that combines multiple hard drives into one logical unit. Here are the main features of each RAID level supported by the Promise FastTrak 378 Controller:
RAID 0: This level splits the data across two or more hard drives, increasing the performance and capacity. However, it does not provide any redundancy or fault tolerance, so if one drive fails, all data will be lost.
RAID 1: This level mirrors the data on two hard drives, providing a backup copy of the data. It increases the reliability and security, but it reduces the capacity by half.
RAID 0+1: This level combines RAID 0 and RAID 1, creating a striped set of mirrored drives. It offers both high performance and high reliability, but it requires at least four hard drives and reduces the capacity by half.
The Promise FastTrak 378 Controller also supports hot swap and hot spare features, which allow you to replace or add hard drives without shutting down your computer. You can use the Promise FastBuild utility to create and manage your RAID arrays, or you can use the Promise FastCheck utility to monitor and repair your RAID arrays. You can also use the Promise Array Management (PAM) software to access your RAID arrays remotely via a web browser. 061ffe29dd